Biogas Production From Seaweed Padina sp

Authors

  • Herdiansyah Putra Fisheries Product Technology Department, Raja Ali Haji Maritime University
  • R. Marwita Sari Putri Fisheries Product Technology Department, Raja Ali Haji Maritime University
  • Aidil Fadli Ilhamdy Fisheries Product Technology Department, Raja Ali Haji Maritime University

DOI:

https://doi.org/10.31629/marinade.v2i01.1251

Keywords:

biogas potential, Padina sp

Abstract

Seaweed have carbohydrates and water content is high as well as low lignin in comparison with terrestrial plants making it easier didegradasi. Therefore, making the seaweed as feedstock in the manufacture of biogas is one solution to improve the utilization of seaweed in Indonesia. The goal of the research is to find out the potential of seaweed type Padina sp with continuous systems in the manufacture of biogas. Seaweed padina sp has a k arakteristik: protein 4.54, moisture content, ash levels 45.16 12.52 and the ratio c/n 20.81 thus Padina sp potential raw material for the manufacture of biogas. The addition of seaweed padina sp when the biogas production process of 657.84 mg/L COD values before the biogas production process on the comparison of 1:1 of (786,195) and 1:2 (782,184) and the value of COD on after amounting to 1:1 (581,624) and 1:2 (569.59) that result in the concentration of methane (CH4) comparison of 1:1 (107.20 ppm) and 1:2 (123.30 ppm). Carbon dioxide (CO2) concentration of 1:1 (512.79 ppm) and 1:2 (527.39 ppm), respectively.

Downloads

Download data is not yet available.

Downloads

Published

2019-04-30

Issue

Section

Articles