Polymerization Of Glyserol Monostearat With Azelaic Acid
DOI:
https://doi.org/10.31629/zarah.v2i1.21Keywords:
AZELAIC ACIDAbstract
In this study, polymerization reaction between glycerol monostearat (1g, 0.002mol) with azelaic acid (2g, 0.005mol) carried out. Production process of this polymer is made in temperature 60-80?C and pressure (~150Pa) by using Novozym's enzyme catalyst 435 for 3 hours. Starting material is glycerol monostearat (MAG) produced through esterification reaction in temperature 60-80?C for 4 hours by using enzyme catalyst are Rhizomucor miehei and Lipozim TL IM. After that purification of MAG carried out through winterization process by using centrifugal that separate MAG and hexane solution. It kept at 0?C for 24 hours until precipitation formed through centrifugation (3,500 rpm, 20 means, 4?C). After MAG produced, it will analyzed by HPLC and found as much as content 100% of both MAG. Further analysis are 1H and 13C NMR and FTIR to know absorption spectrum and peak produced from MAG and polymer.
Downloads
Downloads
Published
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
