Prototype of Gas Leaking Monitoring Device In Gas Distribution Pipe of PT. Prima Gasifikasi Indonesia in Tanjung Batu

  • Eko Prayetno Department of Eelctrical Engineering, Faculty of Engineering, Universitas Maritim Raja Ali Haji, Jalan Politeknik Km. 24 Kelurahan Senggarang, Kecamatan Tanjungpinang Kota, Kota Tanjungpinang 29115, Provins Kepulauan Riau
  • Deny Nusyirwan Department of Naval Engineering, Faculty of Engineering, Universitas Maritim Raja Ali Haji, Jalan Politeknik Km. 24 Kelurahan Senggarang, Kecamatan Tanjungpinang Kota, Kota Tanjungpinang 29115, Provins Kepulauan Riau
  • Ryan Ramadhan Putra Department of Electrical Engineering, Faculty of Engineering, Universitas Maritim Raja Ali Haji, Jalan Politeknik Km. 24 Kelurahan Senggarang, Kecamatan Tanjungpinang Kota, Kota Tanjungpinang 29115, Provins Kepulauan Riau
  • Randika Saputra Department of Electrical Engineering, Faculty of Engineering, Universitas Maritim Raja Ali Haji, Jalan Politeknik Km. 24 Kelurahan Senggarang, Kecamatan Tanjungpinang Kota, Kota Tanjungpinang 29115, Provins Kepulauan Riau
  • Bayu Anggara Department of Electrical Engineering, Faculty of Engineering, Universitas Maritim Raja Ali Haji, Jalan Politeknik Km. 24 Kelurahan Senggarang, Kecamatan Tanjungpinang Kota, Kota Tanjungpinang 29115, Provins Kepulauan Riau
Keywords: gas, leaking detectior, virtual devices, microcontroller

Abstract

This study aims to help PT. Prima Gasifikasi Indonesia makes a device that detects leaks in gas distribution pipes based on microcontroller technology. This gas detector is connected to several virtual devices that make this tool work well, namely the MQ-2 sensor working as a gas detector, NodeMCU to control the device's controls. As a notification sender to Android, the LED indicates the tool is active, and the buzzer is the provider. Information with a voice indicator. This detector can detect gas to a 'distance 'of less "than '25 cm 'from the sensor. The input on this device, namely MQ-2, will be sent directly to NodeMCU using programming, namely C language when detecting gas. From the device, two conditions will appear, the first condition is LOW when the device does not detect gas and the second condition is HIGH; namely, the device is medium detects gas caused by a leaky pipe, if the device detects gas, the 'systems will command the output in the form of a buzzer as a sound indicator to sound and provide a notification sent via the Internet to Android by giving a message that the gas has been detected

Published
2020-10-30
How to Cite
Prayetno, E., Nusyirwan, D., Putra, R. R., Randika Saputra, & Bayu Anggara. (2020). Prototype of Gas Leaking Monitoring Device In Gas Distribution Pipe of PT. Prima Gasifikasi Indonesia in Tanjung Batu. Journal of Innovation and Technology, 1(2), 79-84. https://doi.org/10.31629/jit.v1i2.3170
Section
Articles