@article{Manalu_Prayetno_Pramana_Nugraha_2018, title={Rancang Bangun Sistem Kontrol pH Air Pada Palka Ikan Muatan Hidup Menggunakan Mikrokontroler dan LabVIEW}, volume={7}, url={https://ojs.umrah.ac.id/index.php/sustainable/article/view/573}, DOI={10.31629/sustainable.v7i2.573}, abstractNote={<p>The live fish storege currently is not able to control the pH parameters of the water according to the fish’s living environment. pH needs to be considered so that fish can survive. The purpose of this research is to design a system that can control the pH of water in fish hatch using a microcontroller and LabVIEW. The test is carried out on the hatch with dimensions of 90 cm x 65 cm x 50 cm. Monitoring changes in pH values in real time is done through LCD and LabVIEW. This device is equipped with an LED indicator that can indicate the condition of the relay outside of the LaBVIEW software. The difference in sensor readings designed with a standard measuring instrument is only around 0.05. The appearance process of the sensor reading value on the LCD and LabVIEW runs well with a response time reading of about 0.5 seconds and with a response time in controlling the relay about 0.3 seconds. Fish can survive using a control system designed during the testing process within 2x24 hours. The reading value from the sensor will be stored in real time as long as the LabVIEW software runs.</p> <p><strong>Intisari</strong></p> <p>Palka ikan muatan hidup saat ini tidak mampu mengontrol parameter pH air sesuai dengan lingkungan hidup ikan. pH perlu diperhatikan agar ikan dapat bertahan hidup. Tujuan dari penelitian ini adalah merancang bangun sistem yang dapat mengontrol pH air pada palka ikan menggunakan mikrokontroler dan LabVIEW. Pengujian dilakukan pada palka dengan dimensi 90 cm x 65 cm x 50 cm. Monitoring perubahan nilai pH secara real time ditampilkan menggunakan LCD dan LabVIEW. Perangkat ini dilengkapi dengan indikator LED yang dapat mengindikasikan kondisi dari relay diluar dari perangkat lunak LaBVIEW. Selisih pembacaan sensor yang dirancang dengan alat ukur standar hanya berkisar 0,05. Proses penampilan nilai pembacaan sensor pada LCD <br>dan LabVIEW berjalan baik dengan waktu respon pembacaan sekitar 0,5 detik dan respon waktu dalam mengendalikan relay sekitar 0,3 detik. Ikan dapat bertahan hidup dengan menggunakan sistem kontrol yang dirancang selama proses pengujian dalam waktu 2x24 jam. Nilai pembacaan dari sensor akan tersimpan secara real time selama perangkat lunak LabVIEW berjalan.</p>}, number={2}, journal={Jurnal Sustainable: Jurnal Hasil Penelitian dan Industri Terapan}, author={Manalu, Trimas and Prayetno, Eko and Pramana, Rozeff and Nugraha, Sapta}, year={2018}, month={Oct.}, pages={53–63} }